Saturday 22 December 2018

Oppo Realme 1 Stock Firmware Back To Stock ROM

Do you want to install Stock ROM on Oppo Realme 1? then, you are at the right place. Here we will share all the latest Oppo Realme 1 Stock Firmware Collections. Here we have shared the full list of firmware link to download and install stock firmware on Oppo Realme 1. As we know, Android is one of the highly customizable software and there is a possibility that we may end up in a situation of lag, boot loop or soft brick. Then, this guide will be helpful. It is always good to keep the Realme 1 stock firmware with you in case something went wrong.
If anyone faces problems like Screen freezing, unresponsive Touch, camera fail or bootloop, you can factory reset or flash the latest Oppo Realme 1 Stock Firmware. Check the other advantage of Stock Firmware given below.

Oppo launched their new smartphone called Realme 1 in India. The Realme brand is aimed at the Indian youth which will be exclusively available on the online marketplace. With Realme 1, the company 3 variant with 3GB, 4GB, and 6GB RAM support.
If you have bought this device and looking for the fresh installation of Stock ROM, then you can simply grab the download link and flash the firmware on your phone by following the guide.
Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today's date, rooting or customizing is no rocket science, but people perform these process carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick Oppo Realme 1 back to the previous working condition.

Oppo Realme 1 Specifications:

Oppo Realme 1 features a 6-inch full-HD+ display with a screen resolution of 1080x2160 pixels. It is powered by an octa-core MediaTek Helio P60 SoC processor clubbed with 3GB, 4GB, or 6GB of RAM depending on the variant, as well as a dual-core AI-specific chip. The device runs ColorOS 5.0 based on Android 8.1 Oreo, complete with an India-specific theme. The camera on Realme 1 sports a 13MP rear camera with LED flash, and an 8MP front camera.
As for storage, the Realme 1 comes with 32GB, 64GB, and 128GB of inbuilt storage, depending on the variant, each of which is expandable via microSD card featuring its own dedicated card slot. Along with other connectivity such as Dual Sim, VOLTE, Bluetooth, WiFi, etc, It also backed by a 3410mAh battery.

List of Oppo Realme 1 Stock Firmware Collections:

Version [File Name]Download Link
CPH1859EX_11_A.20_180925_4c47a115Download Here
CPH1859_11_A.19_180806Download Here

Steps to Install Oppo Realme 1 Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-requisites

  • Charge your phone: Before you proceed with the below information, you are recommended to ensure that your Oppo Realme 1 is at least 50% charged.
  • Laptop or PC: To carry out this installation, you need PC or Laptop.
  • Take Device Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.
  • Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)
  • VCOM driver: Download VCOM Driver and install on your computer (still compatible with MT67xx phones)
  • Install Latest Driver: Install the Latest Realme USB Drivers. [For All Android USB Drivers]
  • Download: Download the below given required files on your PC.

Realme will allow Realme 1 and Realme 2 Pro users to unlock the bootloader



Realme, the OPPO sub brand, made waves in the Indian market with the launch of the Realme 1, selling as many as 400,000 units in 40 days. This was followed up by the launch of the Realme 2, and then the Realme 2 Pro. Powered by a Qualcomm Snapdragon 660 SoC for a starting price of ₹13,990 ($196), the Realme 2 Pro offers serious competition to the likes of established players like the Xiaomi Redmi Note 5 Pro and the ASUS ZenFone Max Pro M1.
Unfortunately, OPPO’s Realme devices have their own cons, one of which is the lack of bootloader unlocking support. Without an officially unlocked bootloader, Realme smartphones have a very large, and very often impossible, hurdle to clear before any custom ROM, kernel and other third-party development can take place. As an extension, this also means that attempts to unlock the bootloader unofficially too would void the warranty on the device. Effectively, this will stifle the development of the device, meaning that you will be stuck with whatever OPPO tries to push to the device (or realistically, does not push to the device as it is considered a budget device after all).
Thankfully, the situation seems to be changing. Realme CEO Mr. Madhav Sheth has informed users through Twitter that Realme is looking to allow users of the Realme 1 to unlock their bootloaders. This will be followed by the release of kernel sources for the device, with an expected ETA of first quarter of 2019.


Bootloader unlock for the Realme 2 Pro has already been confirmed in a prior video of #AskMadhav, which is Realme’s attempt at creating an open feedback and dialogue system with its community. Unlock options for the device will be available before January 15, 2019.

We certainly appreciate the CEO of the company making promises on a public platform, and we would appreciate Realme as a serious company even more if it follows through with its promise. There are a few unanswered questions, like the bootloader unlock status as well as status of kernel source releases of other devices in the Realme portfolio, and we hope the company addresses them soon as well.

T-Mobile OnePlus 6T MSMDownloadTool Firmware 9.0 v1 & v2



Okay folks, took forever to find, but we finally have it, the T-Mobile OnePlus 6T MSMDownloadTool, your brick savior, bootloader relocker, among other things, I will include a basic faq at the end.

Requirements:

1. Windows PC
2. OnePlus 6T - T-Mobile Version ONLY (It will fail otherwise).
3. Zip linked below, unzip and keep all files within the same folder.

Steps to restore are as follows:

1. Open up your working folder and run MsmDownloadTool V4.0.exe
2. Power off the device, unplugged from the working pc. 
3. Holding Volume up and down together, plug the device into the working pc (device should now show up in the tool, if it doesn't you may need the qualcomm usb drivers)
4. Once your device shows up, hit start and sit tight, device will reboot upon completion.

MSMDownloadTool 9.0v2: DOWNLOAD LINK
MSMDownloadTool 9.0v1: DOWNLOAD LINK

USB Drivers can be found here: https://androidfilehost.com/?fid=11410963190603879743

Clock Work Mod Recovery

Clock Work Mod Recovery

It is one of the most famous custom recoveries along with TWRP. These recoveries provide a lot more features over the stock recovery that comes with the device. It’s needed to make further modifications to your smartphone su



Pros and Cons of installing CWM Recovery on Realme U1

  1. Allows rooting the phone.
  2. Custom ROM installation on the phone.
  3. Creating backups of the data and restore it at your choice.

  1. The device warranty voids.
  2. Risk of bricking your device if something goes wrong in the procedure.
  3. An end to the Over The Air (OTA) updates from Manufacturer.

Procedure of Installation of CWM Recovery

Prerequisites

  1. It’s important to have the device fully charged as the process can take some time and you don’t want to run out of juice right when you need it.
  2. Make sure to back up all important data.
  3. We are not responsible for any loss or damage to the device
  4. Do make sure that the bootloader is unlocked on your Realme U1. If not then follow this link to Unlock Bootloader.
  • Download Rom Manager app from Play store.
  • Use the application to take backup of the current ROM. Name the backup you created.
  • After taking the backup, click on “Flash Clock Work Mod Recovery”. Chose the appropriate model number and continue.
  • After downloading, it will ask you to install it.
  • The installation procedure requires the phone to reboot.
  • Now after it’s done with the installation, your Realme U1 has CWM custom recovery on it.
  • And to boot into recovery mode, use the ROM manager application you installed and select “Reboot into Recovery” option.
Click on this link to read about how to root your Realme U1 device.

How to Install Custom ROM on Realme U1



This article will take you through the procedure on how to install Custom ROM on Realme U1 device. Also, in this article, we mentioned the risks and benefits of installing custom on your Realme U1 device.

Custom ROM?

A custom ROM means a firmware for the Android platform made by developers to provide extra functionality. Some benefits of installing custom ROMs are:
  1. Customizable user interface
  2. Added functionality over stock ROM
  3. Ability to upgrade to the latest versions of Android
  4. And increased performance
Now, let’s look at some disadvantages of installing custom ROM:
  1. Mostly, if you install a custom ROM on your device, it will void warranty.
  2. Risk of damaging your phone if the procedure is not followed properly.

How to Install Custom ROM on Realme U1

Prerequisites

  • Have the phone fully charged.
  • Do make sure to unlock the bootloader on the device. Unlock Bootloader.
  • Also, the device should have a custom recovery installed on it. Check these articles to install CWM Recovery or TWRP Recovery.
  • And the device needs to have Root access for it to proceed.
  • We do not take any responsibility for any damage or loss.
Now that your device is ready to install Custom ROM, follow the steps below:
  1. Look at different options available for your device and download the custom ROM that you like. Transfer the zip file to your device storage
  2. Now boot the device into custom recovery. Press volume down and power button to boot into custom recovery.
  3. Backup the firmware before installing custom ROM so in case anything happens, you can revert back to it.
  4. Perform factory data reset by wiping user data and cache.
  5. After its done, flash the custom ROM by choosing the zip file. You will need to select the install option to do so. Now install custom ROM file on the device.
  6. When it’s completed, reboot your device and it should have the custom ROM installed and running on it.

Hopefully, this article would have helped you to Install Custom ROM on Realme U1.

Download RMX1801 / RMX1807 Oppo Realme 2 Pro Flash File Firmware



Download Official Firmware [Flash File] Oppo Realme 2 Pro-

Download Official Stock Firmware Flash File For Oppo Realme 2 Pro. If you have Oppo Realme 2 Pro Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.
The Oppo Realme 2 Pro is a Smartphone Which is Run on android 8.1 OS and Powered by a Qualcomm Processor, the Oppo Realme 2 Pro is a Dual sim Smartphone that accept 2 Regular SIM card, connectivity Option’s include 3G  4G. GPS. Wi Fi, Bluetooth etc, Sensor include Goryo proximity Gravity etc.
In Some cases We have bricked our device, then we can bring back the phone (Unbrick) using the Stock firmware anytime. Also if you feel your Oppo Realme 2 Pro lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Oppo Realme 2 Pro.



Note-

1. This Guide is Work only On listed Phone So Please Don’t try it on any other Phone.
2. Flashing The ROM Will Erase all your Data So Must Create a backup of your personal data before Flashing.
3. Please Do Carefully. We are Not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% Charge During Flashing Process,to Stop the Accidentally Switch off.
5. Follow all steps correctly otherwise it cause bootloop.
6. Must backup NVRAM using this Guide [MTK only] before Doing anything.

Download:

Firmware: RMX1807/1801_11_A.05_180926_598934c8

Product name: Oppo Realme 2 Pro
Type: Full ROM
ROM Size: 4 GB
SoC: QCOM
Os: Android 8.1
Password: Null
Gapps: included
Root access: Not
Product version: RMX1807_11_A.05_180926_598934c8

Download:

Firmware: RMX1801 Here

 RMX1807 Here 

QFIL Edition: RMX1807  Here


How to Install Official Firmware/ROM/Flash File Oppo Realme 2 Pro-