How to Install Stock firmware on any Samsung smartphone using Odin downloader!!

Did you brick your Samsung device ? Do you want to upgrade or Downgrade your Samsung smartphone ? Here is a better solution. Now you can flash any stock firmware right from your home without leaving your phone at service center. Yes! In this guide, we will guide you on how to install stock firmware on your Samsung smartphone. To flash you will need to download ODIN software which allows you to flash Samsung software on your Samsung smartphone. Follow the below full guide. Before doing any procedure, its always better to read carefully instead of skipping the steps.

The guide is simple and easy. All you need to do is download the right firmware for your device. To see if you have any stock firmware for your phone. If you couldn't wait, just search for your firmware with "firmware (your phone model)" and flash the firmware via ODIN tool using our guide.

Download and Install the Samsung Kies Software : CLICK HERE or
Download and Install the SamsungUSB Drivers : CLICK HERE


https://drive.google.com/uc?export=download&id=13c_OhTr0ozxqdpMGb0CidVrBRyaUxzpV

DOWNLOAD FILES
 Download ODIN Software

 Download Stock ROM here

Steps For How To Install Stock Firmware on any Samsung Smartphone using ODIN
1.If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
2.First of all, enable the USB Debugging
To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
Once your developer option is active, Go back to your settings -> Open developer option -> 3.Enable USB Debugging
4 .Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right 5.Click your mouse and Open using Administrator odin5.Now Reboot your Phone into Download Mode
So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
6.Now Connect your Phone to PC using the USB Cables
When you connect the USB cable you will see a blue sign in Odin
7.Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button
8.Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
9.wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.
Note: You should not remove or operate on your device until the flashing process in shown to be completed.

Once the flashing process is completed and if everything has gone as planned, you should be able to see a big green box saying "RESET" or "PASSED." This will depend on the version of Odin downloader you have downloaded. By now, the device have finished rebooting and it is safe to remove/unplug the phone/device.

That’s ALL! When you restart your Phone you will have the new stock firmware installed on your device. I hope you learned the procedure on How to Install Stock Firmware on any Samsung Smartphone using ODIN.



Note: You should not remove or operate on your device until the flashing process in shown to be completed.



Once the flashing process is completed and if everything has gone as planned, you should be able to see a big green box saying "RESET" or "PASSED." This will depend on the version of Odin downloader you have downloaded. By now, the device have finished rebooting and it is safe to remove/unplug the phone/device.